Bayside Plasterboard
Email Us Order Now

Compounds & Adhesives

DIY Plasterboard Tool & Accessories

Ensure you use only specifically designed USG Boral DIY tools and accessories when completing your next home plastering project. The full range of USG Boral DIY tools and accessories includes joint tapes, taping tools, corner tools, sandpaper, sanding tools, mitre guides & wall patches.

DIY Stud Adhesive

For the most adventurous DIY enthusiast, USG Boral DIY Stud Adhesive makes light work of building or repairing plasterboard walls and ceilings.

DIY Cornice Adhesive

USG Boral DIY Cornice Adhesive will bond all the decorative plaster pieces you've planned for your new home or renovation.

DIY Patching Plaster

Soft and easy to use, USG Boral DIY Patching Plaster will fill cracks and patch holes in plasterboard walls and ceilings quickly and without fuss.

DIY Total Joint Finish

USG Boral DIY Total Joint Finish adds the perfect finishing touch to any plastering home improvement. Whether you are repairing a ceiling, building an archway or lining an entire room with plasterboard, DIY Total Joint Finish will do just that.

BaseCote® 45, 60 & 90

BaseCote™ is a leading plaster-based setting compound designed for taping and basecoating plasterboard joints, angles  and fastener heads - including SHEETROCK® Plasterboard and FIBEROCK®.

Cornice Adhesive 45 & 60

Cornice Adhesive is a plaster-based adhesive compound. It is formulated for bonding paper-faced and plaster cornices to plasterboard surfaces and reinforcing joints in cornices. Cornice Adhesive may also be used for bonding other plaster decorative products, back-blocking plasterboard joints and laminating plasterboard sheets

Masonry Adhesive

Masonry Adhesive is a plaster based adhesive compound formulated to bond plasterboard sheets to masonry, brick or concrete walls. Masonry Adhesive compound has high bond strength, offering a long setting time and is suitable for bonding to difficult surfaces.

Back-Blocking Adhesive

Back-Blocking Adhesive is a plaster-based setting type compound specially formulated for back-blocking ceiling joints or wall joints. Back-blocking reinforces plasterboard joints and minimises cracking and peaking that results from building movement.

All Purpose Premix

USG Boral All Purpose Premix compound is an economical, air-drying, lightweight compound suitable for all three coat applications or as a finishing coat for all plasterboard joints, angles and fastener heads. It can be used in conjunction with USG Boral BaseCote®, SHEETROCK® Brand Easy Sand™ or USG Boral RediBase™ compound.

FinalCote®

FinalCote® finishing compound is a premixed, air-drying, easy sanding compound developed specially for use as the ideal finishing coat for all plasterboard joints, angles and fastener heads. It is designed to be used in conjunction with EasySand™, BaseCote® or RediBase™ jointing compounds.

LiteFinish™

LiteFinish™ finishing compound is a yellow tinted, lightweight, premixed, air-drying compound developed specially for use as the ideal finishing coat for all plasterboard joints, angles and fastener heads. It is a premium grade product designed to be used in conjunction with EasySand™, BaseCote® or RediBase™ compounds.

SHEETROCK® Total Lite Finishing Joint Compound

SHEETROCK® Total Lite is a yellow tinted high-performance compound specifically formulated for the professional joint flushers in mind and is suitable for applying as a second and finishing coat. Total Lite compound is specifically formulated to provide superior workability; including slick application, good open time, excellent crack resistance and easy sanding.

SHEETROCK® Ultralightweight Finishing Compound

SHEETROCK® Brand UltraLightweight Finishing Joint Compound is up to 10% lighter than USG Boral alternatives. It is ideal for filling (second coat) and finishing over plasterboard joints, fasteners and angles. Designed specifically with the finishing contractor in mind, this compound allows greater control and accuracy with less fatigue at the end of the day.

Premium Bond™ Stud Adhesive

The butter consistency is designed for easy no-slump application, fast grab and maximum adhesive transfer. Premium Bond™ Stud Adhesive is a water-based synthetic stud adhesive used for bonding plasterboard to timber and metal studs for wall and ceiling linings.

Hard Finish Plaster

Hard Finish Plaster is a general purpose product designed to provide a tough, smooth abrasive-resistant finish over masonry, brick and concrete surfaces.

Casting Plaster

Casting Plaster is a general purpose plaster developed and manufactured for use in the production of plaster craft replications. Casting Plaster provides reproductions that are of medium hardness which makes it suitable for carving and turning. Casting Plaster is ideally suited to a wide variety of uses including the production of fibre reinforced cornice sections, cast panels, tiles, ceiling roses, statuary, giftware, articles and models.

Dental Plaster

Dental Plaster is used mainly for flashing and mounting dental models. It can be mixed with a harder dental stone to adjust setting time and increase strength.

Pottery Plaster

Pottery Plaster is a fine specialist plaster designed for use in casting of molds for ceramic products and plaster-craft replications. It is ideal for slip casting of sanitary ware and statuary, and for the manufacture of compression molds used in slab casting of tableware.

Ceraplast™

Plaster for casting of molds for ceramic products and plastercraft replications. Ceraplast™ is a fine specialist plaster used to produce working or slip molds for ceramic products and sanitary wares. It is also suitable for modelling and plastercraft replications.

RediBase™

RediBase™ is a premixed, drying type base compound formulated for use in hot and dry environments. The use of drying type compounds in hot and dry conditions reduces the risk of premature dry-out associated with plaster based compounds.

TopCote 550®

TopCote 550® finishing compound is a premixed, air-drying, economical compound developed specially for use as the ideal finishing coat for all plasterboard joints, angles and fastener heads. It is a premium grade product designed for use in conjunction with EasySand™, BaseCote® or RediBase™ compounds.

Wet Area Sealant

USG Boral Wet Area Sealant is an acrylic water resistant sealant. The sealant remains flexible and is capable of total joint movement of 10%.

Bostik Ultragrip

A specially formulated non-toxic high strength acrylic stud adhesive designed to minimize nail and screw “popping” caused by timber shrinkage or frame movement.

Hamilton Pro Patch Lite

Perfect for smaller jobs and repairs to plasterboard, pre paints, patching holes. Hamilton Pro Patch Lite can be used for taping, second coat and top coating. It's ideal for maintenance contractors, plasterboard pre paints and patching.